I went to Home Debot and bought some 3/8" round steel bar for the axles of the car. I cut two 7" lengths, put some u-joints on them, drilled them, and put pins through them.

After removing the motors I sprayed the mounts with rust off.

After waking up at 3PM I cut the mounts for the two front motors and welded them onto the frame. I also bought all the carrier bolts, lock washers, and nuts that I need and put them in. I bought Home Depot out of 3/8" nylon washers, and I think I'll have to do so a couple more times before I have enough. I put bearing grease on the bolts/washers that I put in so everything pivots smoothly. I still need to spray the Ace Rust Stop on the new metal.